After you finish jumper settings and connect correct cables, power on and
enter the BIOS Setup. Press <Del> during POST (Power On Self Test).
Choose "Load Setup Defaults" for recommended optimal performance.
14. Power-on and Load BIOS Setup
15. AOpen Bonus Pack CD
17. BIOS Upgrade under Windows Environment
You may accomplish BIOS upgrade procedure with EzWinFlash by the following steps, and
it’s STRONGLY RECOMMENDED to close all the applications before you start the
upgrading.
1. Download the new version of BIOS package zip file from our official web site. Unzip the
download BIOS package (ex: WMX4GVR102.ZIP) with WinZip (http://www.winzip.com
)
in Windows environment.
2. Save the unzipped files into a folder, for example, WMX4GVR102.EXE
WMX4GVR102.BIN.
3. Double click on WMX4GVR102.EXE, EzWinFlash will detect the model name and BIOS
version of your motherboard. If you had got the wrong BIOS, you will not be allowed to
proceed with the flash steps.
4. You may select preferred language in the main menu, then click [Start Flash] to start the
BIOS upgrade procedure.
5. EzWinFlash will complete all the process automatically, and a dialogue box will pop up
to ask you to restart Windows. You may click [YES] to reboot Windows.
6. Press <Del> at POST to enter BIOS setup, choose "Load Setup Defaults", then “Save
Exit Setup”. Done!
It is strongly recommended NOT to turn off the power or run any application during
FLASH PROCESS.
16. Installing Onboard Sound Driver
You can use the autorun menu of Bonus CD. Choose the utility and driver and selec
model name. After selecting the model name, you can install its AGP, IAA, Audio, LAN
and USB2.0 drivers from this CD.
Del
Warning: Please avoid of using "Load
Turbo Defaults", unless you are sure
our system components (CPU, DRAM,
HDD, etc.) are good enough for turbo
settin
.
This motherboard comes with AC97 CODEC. This audio driver supports Windows 98SE
and upper Windows OS; you can find the audio driver from the Bonus Pack CD auto-run
menu.
Warning: The upgrade of new BIOS will permanently replace your original BIOS
content after flashing. The original BIOS setting and Win95/Win98 PnP information
will be refreshed and you probably need to re-configure your system.
To Next Page
Loading...
Need help?
General
