AOpen WT10M-FRG - 3 Product Introduction; Getting Started

14
3. Product Introduction
3-1 Getting started
 Connect the AC power adapter to your Chromebase Mini
10”:
 Plug the AC power cord into a 100 V~240 V power source.
 Connect the DC power connector into your Chromebase Mini
10”(DC) input port.
IMPORTANT!
• Only use the recommended adapter and cable that came with
your Chromebase Mini 10”.
• We strongly recommend that you use a grounded wall socket
while using your Chromebase Mini 10”.
• The socket outlet must be easily accessible and near your
Chromebase Mini 10”.
• To disconnect your Chromebase Mini 10” from its main power
supply, unplug your device from the power socket.
NOTE:
Power adapter information:
• Input voltage: 100-240 Vac
• Input frequency: 50-60 Hz
• Rating output current: 2.1A (40 W)
• Rating output voltage: 19 V
BC1.2 each port supported
5V/1.5A