To Next PageTo Next PageWhat to do if my Aosom Air Conditioner shows error code Ft?
If your Aosom Air Conditioner displays the error code Ft, it indicates a high level of condensate water. To resolve this, empty the drain pan by removing the rubber plug.
Why is my Aosom HOMCOM 823-006V70 Air Conditioner not turning on?
If your Aosom Air Conditioner isn't operating, ensure the power cord is securely inserted into the wall outlet and empty the drain pan by removing the rubber plug. Also, make sure that the operating temperature is within the range of 5-35?.
Why is my Aosom Air Conditioner not cooling properly?
If your Aosom Air Conditioner's performance is reduced, the air filter might be dirty, so clean it as necessary. Ensure the air duct isn't blocked. Keep the room door and windows closed. Also, confirm the exhaust hose is securely attached.
What to do if my Aosom HOMCOM 823-006V70 Air Conditioner is leaking water?
If you notice water leakage from your Aosom Air Conditioner, it could be due to overflow while moving the unit. Empty the water tank before transport. Also, check the drain hose for kinks or bends and straighten it to ensure proper drainage.
Why is my Aosom HOMCOM 823-006V70 so loud?
If your Aosom Air Conditioner is producing excessive noise, ensure it's placed on a horizontal and firm ground. Check for loose, vibrating parts and secure them tightly. If the noise sounds like water flowing, it's likely the normal sound of flowing refrigerant.
What does error code E1 mean on my Aosom HOMCOM 823-006V70 Air Conditioner?
If your Aosom Air Conditioner displays the error code E1, it indicates an ambient temperature sensor failure. Check the sensor connection and replace it if necessary, or try cleaning the temperature sensor.
What does error code E2 mean on my Aosom Air Conditioner?
If your Aosom Air Conditioner displays the error code E2, it indicates coil temperature sensor failures. Check the sensor connection and replace it if necessary, or try cleaning the temperature sensor.
What does error code E0 mean on my Aosom HOMCOM 823-006V70 Air Conditioner?
If your Aosom Air Conditioner displays the error code E0, it indicates communication faults between the main PCB and display PCB. Check the wire harness of the display PCB for damage.
Overview of portable AC functions: cooling, ventilation, dehumidification. Safe use of R290 coolant.
Explains unit and manual symbols, including warnings about flammable refrigerant and reading the manual.
Critical safety rules for operating the appliance to prevent fire, electric shock, and injury.
Essential safety measures for technicians servicing the unit with R290 refrigerant.
Identifies key components of the air conditioner with numbered labels.
Highlights capabilities: cooling, dehumidifying, ventilation, timer, sleep mode, remote control, mobility.
Steps for safely unpacking the unit and verifying its condition.
Guidance on selecting an appropriate placement for optimal air circulation and safety.
Detailed instructions for connecting the exhaust hose to vent hot air and moisture outdoors.
Explains the functions of the control panel buttons and the information shown on the display.
Details the buttons and functions of the remote control for convenient operation.
Describes each key on the unit and remote, and their corresponding indicator lights.
Covers unit start-up, shutdown, and various operation modes like Cool, Fan, Dry, and Sleep.
Instructions for managing condensate water using the self-evaporating system or drain hose.
Step-by-step guide for cleaning the air filter to maintain unit performance and prevent damage.
General safety guidelines for handling refrigerant cleanup procedures.
Procedures for cleaning, drying, and storing the unit for extended periods.
Guidance on responsible disposal of the appliance, emphasizing environmental safety.
General| Brand | Aosom |
|---|---|
| Model | HOMCOM 823-006V70 |
| Category | Air Conditioner |
| Language | English |
