What to do if my Aosom HOMCOM 823-010V70 Air Conditioner shows error code Ft?
If your Aosom Air Conditioner displays the error code Ft, it indicates a high level of condensate water. To resolve this, empty the drain pan by removing the rubber plug.
Why is my Aosom HOMCOM 823-010V70 Air Conditioner not turning on?
If your Aosom Air Conditioner isn't operating, ensure the power cord is securely inserted into the wall outlet and empty the drain pan by removing the rubber plug. Also, make sure that the operating temperature is within the range of 5-35?.
Why is my Aosom Air Conditioner not cooling properly?
If your Aosom Air Conditioner's performance is reduced, the air filter might be dirty, so clean it as necessary. Ensure the air duct isn't blocked. Keep the room door and windows closed. Also, confirm the exhaust hose is securely attached.
What to do if my Aosom HOMCOM 823-010V70 is leaking water?
If you notice water leakage from your Aosom Air Conditioner, it could be due to overflow while moving the unit. Empty the water tank before transport. Also, check the drain hose for kinks or bends and straighten it to ensure proper drainage.
Why is my Aosom HOMCOM 823-010V70 so loud?
If your Aosom Air Conditioner is producing excessive noise, ensure it's placed on a horizontal and firm ground. Check for loose, vibrating parts and secure them tightly. If the noise sounds like water flowing, it's likely the normal sound of flowing refrigerant.
What does error code E1 mean on my Aosom HOMCOM 823-010V70?
If your Aosom Air Conditioner displays the error code E1, it indicates an ambient temperature sensor failure. Check the sensor connection and replace it if necessary, or try cleaning the temperature sensor.
What does error code E2 mean on my Aosom HOMCOM 823-010V70?
If your Aosom Air Conditioner displays the error code E2, it indicates coil temperature sensor failures. Check the sensor connection and replace it if necessary, or try cleaning the temperature sensor.
What does error code E0 mean on my Aosom HOMCOM 823-010V70 Air Conditioner?
If your Aosom Air Conditioner displays the error code E0, it indicates communication faults between the main PCB and display PCB. Check the wire harness of the display PCB for damage.
Safety guidelines for operating the appliance to prevent fire, shock, or injury.
Safety measures to be followed when servicing the appliance with R290.
Step-by-step guide on connecting the exhaust hose for venting.
Explains the purpose of each key and indicator on the control panel.
Covers starting, shutting down, and operating modes like cooling, fan, dry, sleep.
General measures to follow when cleaning up refrigerant spills.
General| Brand | Aosom |
|---|---|
| Model | HOMCOM 823-010V70 |
| Category | Air Conditioner |
| Language | English |
To Next Page
