Aoycocr Smart Switch - User Manual

Quick Start
01 | PRODUCT OVERVIEW
      
02 | INDICATOR LIGHT STATUS
03 | WARNINGS
 Turn off the power at the circuit breaker and test that power is off before
wiring.
 Check supported maximum wattage rating: 1200W.
 Replace single pole switch only; NO NOT compatible with 3-way switch.
04 | INSTALLATION
Note
 Make Sure that the power at the circuit breaker is off before wiring.
Light Color Light Status Switch Status
Red Power On
Blue OFF
Green Blink quickly Ready for default configuration mode(Easy
Mode)
Blink slowly Ready for AP mode Configuration

Summary

PRODUCT OVERVIEW

INDICATOR LIGHT STATUS

WARNINGS

INSTALLATION

Installation: Power and Wiring Prep

Safety checks, testing power, removing old switch, and wire identification before installation.

Installation: Wiring and Mounting

Connect the switch wires, secure the unit with screws, and snap on the wall plate.

Initial Power On and Wi-Fi Connection

Power on the installed switch and begin the Wi-Fi connection process.

CONFIGURE THE APP TO THE SWITCH

App Download and Easy Mode Setup

Download Smart Life app, ensure prerequisites, and follow Easy Mode pairing steps.

AP Mode Setup

Alternative AP Mode pairing for Wi-Fi connection when Easy Mode is unsuccessful.

RESET & RESTART PROCEDURES

TROUBLESHOOTING GUIDE

SUPPORT AND WARRANTY

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document provides a comprehensive guide for the installation, configuration, and troubleshooting of a smart light switch. The device is designed to replace a standard single-pole switch, enabling remote control and smart home integration.

Function Description

The smart light switch serves as a modern replacement for traditional wall switches, offering enhanced control over lighting. Its primary function is to turn lights on and off, either manually via the physical switch or remotely through a connected smartphone application. The switch integrates with Wi-Fi networks, allowing users to manage their lighting from anywhere with an internet connection. It supports both "Easy Mode" and "AP Mode" for network configuration, catering to different setup preferences and network environments. The device is specifically designed for single-pole switch applications and is not compatible with 3-way switch setups.

Usage Features

The smart light switch incorporates several features to enhance user experience and convenience:

• Indicator Light Status: The switch includes an LED indicator that communicates its current status through different colors and blinking patterns.

  • Red: Indicates the switch is powered on.
  • Blue: Indicates the switch is off.
  • Green (Blink quickly): Signifies that the switch is in default configuration mode (Easy Mode), ready for quick setup.
  • Green (Blink slowly): Indicates the switch is in AP mode configuration, an alternative setup method for more challenging network environments.

• Manual Control: Despite its smart capabilities, the switch retains a physical button for manual on/off control, ensuring functionality even without network access.

• Remote Control via Smart Life APP: The core smart feature is its integration with the Smart Life application. Users can download the app from Google Play or the App Store to:

  • Add Devices: Easily add the smart switch to their smart home ecosystem.
  • Configure Network: Connect the switch to their home Wi-Fi network (2.4 GHz only).
  • Remote On/Off: Control the lights from their smartphone, regardless of their physical location.
  • Status Monitoring: View the current status of the switch (on/off) through the app.

• Two Configuration Modes:

  • Easy Mode: This is the default and recommended configuration method, characterized by the indicator light blinking quickly. It's designed for a straightforward setup process.
  • AP Mode: If Easy Mode fails, AP Mode provides an alternative. In this mode, the switch creates its own Wi-Fi hotspot, allowing the phone to connect directly to it for configuration. This mode is indicated by the light blinking slowly.

• Reset Functionality: The switch can be reset by pressing and holding the button for 25 seconds. This action clears existing network configurations and allows the user to reconfigure the device, cycling through Easy Mode (quick blinking blue) and AP Mode (slow blinking blue).

Maintenance Features

The manual provides crucial information for the safe and effective maintenance of the smart light switch:

• Pre-Installation Safety: Emphasizes the importance of turning off power at the circuit breaker and testing for power before any wiring work. This is a critical safety measure to prevent electrical shock.

• Neutral Wire Requirement: Highlights that a neutral wire is required for the switch to function. Users are advised to confirm the presence of a neutral wire (typically white) in their wall box. If a neutral wire is absent, professional electrician assistance is recommended.

• Wiring Guidance: Provides a wiring diagram and instructions to ensure correct connection of the switch wires to the wall box wires. It also advises on securely fastening wire conductors.

• Compatibility Check: Explicitly states that the switch is for single-pole applications only and is not compatible with 3-way switches. Users are also reminded to check the maximum supported wattage rating.

• Wi-Fi Signal Strength: Recommends ensuring a strong Wi-Fi signal in the installation area for optimal performance and reliable connectivity.

• Professional Assistance: Advises users without wiring experience to consult a professional electrician for installation, prioritizing safety and correct setup.

• Troubleshooting Guide: Includes a dedicated section to help users diagnose and resolve common issues, such as:

  • Connectivity Problems: Solutions for incorrect Wi-Fi passwords, weak signals, or the switch not being allowed for connection.
  • Manual Control Issues: Guidance for situations where the switch cannot be turned on/off manually, including checking the circuit breaker and wiring.
  • App Response Issues: Advice for when the switch doesn't respond to the app, covering network delays, permission settings, and checking if the switch is out of order.
  • Blinking Light Bulb: Addresses issues like electric leakage or incompatible light bulbs.

• Support Information: Provides contact details for technical support (email) and a Facebook page for community assistance, ensuring users have resources for help if needed.

• Warranty and Guarantee: Mentions a 90-day unconditional full money-back guarantee, a 2-year warranty, and lifetime support, offering peace of mind regarding product reliability and customer service.

Aoycocr Smart Switch Specifications

General

Type	Smart Switch
Connectivity	Wi-Fi
Max Load	10A
Wireless Standard	IEEE802.11 b/g/n
Voice Control	Amazon Alexa, Google Assistant
App Control	Smart Life App
Voltage	100-240V
Certification	CE, RoHS
Operating Voltage	AC 110-240V
Material	PC flame retardant material