aoyue 8032 User Manual

Turbine motor type hot-air gun system. Provides non-pressurized hot
air to heat targeted areas evenly and effectively.
Thank you for purchasing Aoyue 8032/8032A++ Hand-held hot air gun.
It is important to read the manual before using the equipment.
Please keep manual in accessible place for future reference.
INSTRUCTION MANUAL
HAND-HELD HOT AIR GUN

aoyue 8032 Specifications

General

Model	8032
Category	Power Tool
Display	Digital
Heater Material	Ceramic
Voltage	110V / 220V
Temperature Range	100-480°C
Airflow	Max 23L/min

Summary

Specifications

Functions and Features

Safety Precautions

Panel Guide

Operating Guidelines

To Remove SMD ICs

Step-by-step guide for removing Surface Mount Device (SMD) Integrated Circuits (ICs) using the hot air gun.

To Solder SMD ICs

Step-by-step guide for soldering SMD ICs onto a Printed Circuit Board (PCB) using the hot air gun.

Operating Guidelines (Continued)

After Using the Unit

Procedures for safely shutting down and cooling the hot air gun after operation.

Replacing the Heating Element

Instructions and cautions for replacing the heating element in the hot air gun.

Temperature Chart

Replacement Air Nozzles

Health and Environmental Precautions