Need help?Do you have a question about the APART PR1000R and is the answer not in the manual?
General| Type | FM/AM Tuner |
|---|---|
| FM Tuning Range | 87.5 - 108 MHz |
| Power Consumption | 10 W |
| Weight | 3.5 kg |
| Signal-to-Noise Ratio | 70 dB (FM), 50 dB (AM) |
Controls unit power and indicates standby or off status.
Button to switch between AM and FM broadcast bands.
Scans preset stations sequentially or all presets once.
Activates mono mode for weak reception or stereo for better signal.
Saves the current radio station to a preset memory location.
Connects FM antenna or cable distribution network signal.
Connects the supplied AM antenna.
Adjusts tuner output level to match other audio sources.
Provides audio output via cinch connectors.
Connects optional IR extender or multi-room system IR signal.
For connecting to computers or compatible equipment.
Houses the mains fuse for protection and replacement.
To Next Page
