Installation and Quick Start 3
Preliminary Information
Features
All Network Management Cards have standard features that do
the following:
• Detect 10/100 Mbps connection speeds
• Provide a data log accessible by File Transfer Protocol
(FTP), Secure CoPy (SCP), or a Web browser
• Provide UPS scheduling features
• Provide an event log that is accessible by Telnet, FTP,
SCP, or a Web browser
• Generate system log (Syslog) messages
• Enable you to configure a BOOTstrap Protocol
(BOOTP) or Dynamic Host Configuration Protocol
(DHCP) server to provide the TCP/IP values a Network
Management Card needs for network communication
• Generate e-mail notifications for UPS or system events
• Limit SNMP traps, e-mail notification, and event logging
based on severity and categories of events
• Enable you to configure multiple Management Cards
simultaneously over the network
• Provide support for APC Silcon UPS models
• Provide support for APC AIS 5000 UPS models
• Provide UPS-specific application modules based on the
Management Card’s hardware platform
• Provide enhanced security by supporting Secure Sockets
Layer (SSL) and Secure CoPy (SCP)
AP9618 features
The AP9618 Network Management Card EM/MDM includes
the analog modem and Integrated Environmental Monitor
features described in “Integrated Environmental Monitor
(AP9618 and AP9619)” on page 4.
AP9619 features
The AP9619 Network Management Card EM includes the
Integrated Environmental Monitor features described in
“Integrated Environmental Monitor (AP9618 and AP9619)” on
page 4; the AP9619 does not include the analog modem
feature.
To Next Page
Loading...
Need help?
General
