APC AP9617 - Information and Status Fields

®
USER’S GUIDE network management card
13
Information and status fields
Main screen information fields.
• Two fields identify the APC operating system (AOS) and application
(APP) firmware versions. The application firmware uses a name that
identifies the type of DC Power Plant that the Management Card
connects to the network. In the Example main screen, the
Management Card uses the application firmware for the DC Power
Plant.
Network Management Card AOS v1.0.7
MX28B DC APP v1.1.1
• Three fields identify the system Name, Contact, and Location values.
Name : Plant1
Contact : Tom_Adams
Location : TestLab
•An Up Time field reports how long the Management Card has been
running since it was last turned on or reset.
Up Time : 1 Day 4 Hours 5 Minutes
• Two fields identify when you logged on, by Date and Time.
Date : 04/15/2004
Time : 05:49:30
•A User field identifies whether you logged on as an Administrator or
Device Manager.
User : Administrator
To set the Name, Contact, and Location values, see
System Menu.