®
USER’S GUIDE
network management card
14
Main screen status fields.
•A Stat field reports the Management Card status.
Stat : P+ N+ A+
•A DC model and name field reports the status of the DC Power Plant.
For example:
DC Power Plant : No Alarms Present
P+ The APC operating system (AOS) is functioning properly.
N+ The network is functioning properly.
N? A BOOTP request cycle is in progress.
N– The Management Card failed to connect to the network.
N! Another device is using the Management Card’s IP address.
A+ The application is functioning properly.
A– The application has a bad checksum
A? The application is initializing
A! The application is not compatible with the AOS.
If the AOS status is not P+, contact APC Worldwide
Customer Support, even if you can still access the
Management Card.
To Next Page
Loading...
