EasyManua.ls Logo

APC AP9630 - User Manual

APC AP9630
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Manual de Instalação
Network
Management
Card
AP9630
AP9631
Question and Answer IconNeed help?

Do you have a question about the APC AP9630 and is the answer not in the manual?

APC AP9630 Specifications

General IconGeneral
Cabling technology10/100BaseT(X)
Security algorithmsSNMP
Ethernet LAN data rates10, 100 Mbit/s
Ethernet interface typeFast Ethernet
Supported network protocolsHTTPS, HTTP, Telnet, SMTP, TCP/IP
Password protectionYes
Product typeNetwork management card
CertificationAS/NZS 3548 (C-Tick) A, EN 55022 A, EN 55024, FCC Part 15 A, GOST, ICES-003, VCCI A
Ethernet LAN (RJ-45) ports1
Sustainability certificatesRoHS
Storage temperature (T-T)-5 - 45 °C
Operating temperature (T-T)0 - 45 °C
Operating relative humidity (H-H)0 - 95 %
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth114 mm
Width121 mm
Height38 mm
Weight80 g
Package depth159 mm
Package width235 mm
Package height51 mm
Package weight340 g

Summary

How to Avoid Equipment Damage

Disconnect Power from UPS and Chassis

Essential safety step to prevent damage when installing the network card.

Preliminary Information

Product Features and Documentation

Details card functions, related documents, components, and disclaimers.

UPS Installation Guide

Installing Card in Various UPS Models

Guide for installing the card in different UPS types, noting incompatibilities.

Step 1: Disconnect Smart-UPS Power

Critical safety step to disconnect AC and DC power from the UPS.

Step 2: Install Network Management Card

Procedure for physically installing the network card into the UPS slot.

Step 3: Restore Power to Card Slot

How to restore power to the installed card slot.

Step 4: Configure Network Management Card

Directs users to the quick configuration section.

Expansion Chassis Installation Guide

Using Expansion Chassis and AC Adapter

When to use chassis/adapter and steps for installation and power disconnection.

Quick Configuration Guide

TCP;IP Configuration Overview and Methods

Overview of required TCP/IP settings and available configuration methods.

Configuration Tools and Protocols

Details on using IP Wizard, .ini utility, BOOTP, and DHCP.

Accessing Configured Network Card

Access Interfaces Overview

Lists available interfaces like Web, Telnet, SSH, SNMP, FTP, SCP.

Command Line Access (Telnet, SSH)

Using Telnet and SSH for command-line access to the card.

Network Management Protocols (SNMP, FTP, SCP)

Using SNMP, FTP, and SCP for monitoring, management, and file transfer.

System Security Management

Information on enhancing the security of the management card.

Installing Multiple Management Cards

Installation Overview and Prioritization

Importance of order and priority levels for installing multiple cards.

Expansion Chassis Installation Procedures

Covers chassis models, installation in chassis, and serial configurations.

Symmetra UPS and Pre-installed Card Scenarios

Guides for Symmetra UPS installation and managing pre-installed cards.

Product Specifications

Physical and Environmental Specifications

Details physical dimensions, weight, and environmental operating conditions.

Regulatory Compliance Information

Information on emissions, immunity, and certifications.

Radio Frequency Interference Information

Regional Compliance Statements

Compliance information for FCC (USA), ICES (Canada), VCCI (Japan), BSMI (Taiwan).

Australia, New Zealand, and EU Compliance

Statements regarding radio interference and EU directives for product compliance.

APC Customer Support Information

Worldwide and Regional Support Contacts

Contact details for APC's global and regional customer support centers.

Related product manuals