APC Network Management Card - Presentation; Unpacking and check on contents


Preliminary Information
Features of the
Network
Management
Card
The following features have been added to the APC Network
Management Card:
• Autosenses 10/100 MBS connection speeds.
• Provides a data log accessible by FTP or a web browser.
• Supports Remote Monitoring Services.
• Provides UPS scheduling features.
• Supports the APC PowerChute Network Shutdown
utility.
• Provides an event log which is accessible by Telnet, FTP,
or a Web browser.
• Generates Email notifications for UPS or system events.
• Limits SNMP traps and Email notifications based on the
severity level of the events.
• Supports using simple-signaling PowerChute
plus
with
the same UPS as the Management Card.
• Supports using the APC Management Card Wizard to
mass configure Management Cards over the network.
• Supports the APC Silcon DP300E series UPS models.
• Provides UPS-specific application modules based on the
Management Card’s hardware platform, and the
application module’s.
Related
documents
The APC Network Management Card utility CD contains the
following documentation:
• Network Management Card User’s Guide
(.\doc\usrguide.pdf)
•
Management Card addendum
(
.\doc\addendum.pdf
)
•
PowerNet MIB Reference Guide
(
.\doc\mibguide.pdf
)
•
Network Management Station (NMS) Reference Guide
(.\doc\nms.pdf)
• CD-ROM contents file (.\content.txt)
• Network Management Card Release Notes (.\relnotes.txt)
• Installation instructions in text format (
.\install.txt
)
• Troubleshooting documents (.\trouble\*.*)
Continued on next page