APC Network Management Card Installation And Quick Start Manual


Preliminary Information, continued
Inventory
In addition to this
Installation and Quick Start Guide
, the
Management Card package includes the following items:
• Network Management Card
• APC Network Management Card
utility
CD
(991-0200)
• Smart-signaling cable (940-0024)
• Installation of Multiple Management Cards sheet (990-
0231)
• Declaration of Conformity (992-0009)
• Warranty registration form
• Network Management Card Quality Assurance Test slip
Note: Save the assurance test slip until you have installed
and configured the Management Card. The slip
contains the MAC address. You may need to refer
to this address when performing the procedures
outlined in this guide’s “Quick Configuration”
section.
Report damage
or missing
contents
Inspect the package and contents for any signs of shipping
damage, and make sure that all parts were sent. If you find
shipping damage, report that damage immediately to the
shipping agent. Also, report any damage, missing contents or
other problems to APC and your APC reseller, immediately.
Please recycle
The shipping materials are recyclable. Please save them for later
use, or dispose of them appropriately.

APC Network Management Card Specifications

General

Device Type	Network Management Card
Data Link Protocol	Ethernet, Fast Ethernet
Management Protocols	SNMP, HTTP, HTTPS, Telnet, SSH
Remote Management Protocol	HTTP, HTTPS, SSH, Telnet, SNMP
Security	RADIUS, Secure Shell (SSH), Secure Sockets Layer (SSL)
Form Factor	Plug-in module
Features	Event logging
Power Requirements	Via UPS
Environmental Monitoring	Temperature, humidity (with optional sensors)
Network Interface	10/100 Mbps Ethernet
Compatibility	Compatible with select APC Smart-UPS and Symmetra UPS models
Firmware Updates	Yes, via network or web interface