APC Network Management Card User Manual

34003641EN/AF - Page 5
1. Presentation
1.1 Unpacking and check on contents ................................................................................................................ 7
1.2 Overview ........................................................................................................................................................... 8
1.3 Functions .......................................................................................................................................................... 9
1.4 Technical characteristics ............................................................................................................................... 11
1.5 List of parameters and default values .......................................................................................................... 12
2. Installation
2.1 Installation ....................................................................................................................................................... 14
DIP-switch settings ........................................................................................................................................... 14
Installation in a UPS or STS equipped with slots ............................................................................................. 15
Installation in a MultiSlot module (UPS only) .................................................................................................... 15
2.2 Environment Sensor installation .................................................................................................................. 16
2.3 Connection of the Ethernet link .................................................................................................................... 16
Connection to a hub ......................................................................................................................................... 16
Connection to a computer ................................................................................................................................ 16
2.4 Indications ....................................................................................................................................................... 17
3. Configuration
3.1 Default IP address .......................................................................................................................................... 18
3.2 Parameter setting ........................................................................................................................................... 18
Via the serial link .............................................................................................................................................. 18
Via the network ................................................................................................................................................. 19
Contents

APC Network Management Card Specifications

General

Device Type	Network Management Card
Data Link Protocol	Ethernet, Fast Ethernet
Management Protocols	SNMP, HTTP, HTTPS, Telnet, SSH
Remote Management Protocol	HTTP, HTTPS, SSH, Telnet, SNMP
Security	RADIUS, Secure Shell (SSH), Secure Sockets Layer (SSL)
Form Factor	Plug-in module
Features	Event logging
Power Requirements	Via UPS
Environmental Monitoring	Temperature, humidity (with optional sensors)
Network Interface	10/100 Mbps Ethernet
Compatibility	Compatible with select APC Smart-UPS and Symmetra UPS models
Firmware Updates	Yes, via network or web interface