APC Network Management Card User Manual

Page 4 - 34003641EN/AF
Foreword
Information, advice, help.
Visual indication.
Action.
Important operations.
Pictograms used in this manual
Software screen
accessed via the
Network
Management
Card.
UPS Properties : Text in bold italics has
been taken from the software.
Federal Communication Commission (FCC) statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
EMC compatibility
When correctly installed and used in accordance with the manufacturer’s instructions, Network Management Card comply
with the following standards:
◗ ATI safety: EN 60950/A11 (2005).
◗ EMC: EN 61000-6-2 (2005), EN 61000-6-3 (2006).
Conformity with European directives:
◗ Low voltage: 2006/95/EEC.
◗ EMC: 2004/108/EEC.

APC Network Management Card Specifications

General

Device Type	Network Management Card
Data Link Protocol	Ethernet, Fast Ethernet
Management Protocols	SNMP, HTTP, HTTPS, Telnet, SSH
Remote Management Protocol	HTTP, HTTPS, SSH, Telnet, SNMP
Security	RADIUS, Secure Shell (SSH), Secure Sockets Layer (SSL)
Form Factor	Plug-in module
Features	Event logging
Power Requirements	Via UPS
Environmental Monitoring	Temperature, humidity (with optional sensors)
Network Interface	10/100 Mbps Ethernet
Compatibility	Compatible with select APC Smart-UPS and Symmetra UPS models
Firmware Updates	Yes, via network or web interface