APC Network Management Card User Manual

34003641EN/AF - Page 3
Introduction
Thank you for selecting an APC by Schneider Electric product to protect your electrical equipment.
The Network Management Card has been designed with the utmost care. We recommend that you take the time to read
this manual to take full advantage of the many features of your new equipment.
Environment
APC by Schneider Electric pays great attention to the environmental impact of its products during the design and
manufacture stages, through to the end of its life cycle.
◗ This product complies with the most strict regulations.
◗ It does not contain CFCs or HCFCs.
Recycling of packing materials
Packing materials were selected to facilitate recycling. Please make sure they are correctly recycled in compliance with all
applicable regulations.
Recycling of the product at the end of its life cycle
APC by Schneider Electric undertakes to recycle all recovered products in installations, complying with applicable
regulations. Please contact our sales office.
Special precautions
◗ If the card must be stored prior to installation, storage must be in a dry place.
◗ The admissible storage temperature range is -10° C to +70° C.

APC Network Management Card Specifications

General

Device Type	Network Management Card
Data Link Protocol	Ethernet, Fast Ethernet
Management Protocols	SNMP, HTTP, HTTPS, Telnet, SSH
Remote Management Protocol	HTTP, HTTPS, SSH, Telnet, SNMP
Security	RADIUS, Secure Shell (SSH), Secure Sockets Layer (SSL)
Form Factor	Plug-in module
Features	Event logging
Power Requirements	Via UPS
Environmental Monitoring	Temperature, humidity (with optional sensors)
Network Interface	10/100 Mbps Ethernet
Compatibility	Compatible with select APC Smart-UPS and Symmetra UPS models
Firmware Updates	Yes, via network or web interface