CHAPTER 3: MENU COMMANDS
10
Display Menu
The Display Menu allows the user to customize the PowerView display.
Display Function Options
Date/Time Sets the correct date and time. Date: dd-mmm-yyyy
Ex:11-Aug-2003
Time: hh:mm:ss
Ex: 21:36:10
Password
Protects against unauthorized
configuration changes.
Password Sets a password.
Valid characters include:
A–Z, or 0–9
Type ‘_’ to complete.
Timeout Sets the inactivity timer.
1, 2, 5, 10 (default); 30 minutes;
1, 2, or 4 Hours; or Forever
Invalidate
Puts password into effect. Prevents
unauthorized changes to the UPS
configuration.
Information
Displays PowerView model number,
serial number, date of manufacture, and
revision information.
Beeper Sets audible alarm (beeper) criteria.
At UPS Not used with the UPS.
At Display
Sets parameters for the audible alarm in
the PowerView.
Power Failure,
Power Failure + 30 seconds,
Low Battery, or Never
Volume Sets audible alarm volume. Off, Low (default), Medium, or High
Click
Sets sound when pressing display
buttons.
On (default), Off
Contrast Sets LCD screen contrast. 0, 1, 2, 3, 4, 5, 6, or 7
Config
Customizes the information displayed on
the Startup screen.
Use factory defaults when
possible.
To Next Page
Loading...
