Congratulations!
You're moments away from experiencing your new Novus speakers. We're honored that you chose
Aperion Audio to bring your music and movies to life!
Feel free to contact us if we can answer any questions or provide you with setup advice. Above alI, enjoy!
- Aperion Audio Team
Quick Setup
The initial set-up of your Novus loudspeaker is relatively easy. Please take your time reading the guideli-
nes and more detailed instructions on the following pages of this manual after completing the first four
steps below.
1. Unpacking. Carefully remove the loudspeaker from the packaging and position it with its underside on
the floor. Do not use any sharp objects for the unpacking since they may scratch the speakers. We stron-
gly recommend that you keep the box and packaging materials for future use.
2. Positioning. Place the loudspeaker facing the listening area at its desired position in the room.
3. Connecting. While the amplifier is switched off, connect each loudspeaker to the amplifier with the sp-
eaker cable. Turn the volume level all the way down and power the amplifier on.
4. Listening. The loudspeaker is now ready to play. Optimal performance will only be realized after care-
ful positioning and running the speakers as described over the course of the following pages. Enjoy your
new Aperion Audio loudspeakers!
Feel free to contact the Aperion gurus with any further questions or for additional assistance.
Switch off your amplifier before connecting your new speakers. Make sure that the speaker cables are
tightened and have a strong connection to the speaker terminal and amplifier terminal.
Listening to high sound pressure levels over a longer period of time may harm your hearing. To avoid
hearing loss, do not listen to high sound levels over a prolonged period of time.
Safety instructions
To Next Page
Loading...