Apevia Signature Series User Manual

Allows using only the necessary cables for a cleaner look and better airflow.

Features a 135mm blue LED fan that operates silently and is thermally controlled.

Specifies the power supply dimensions as 150mm (W) x 158mm (L) x 86mm (H).

Includes OVP, OPP, UVP, and SCP for comprehensive safety and reliability.

Details AC input voltage (115-230V) and frequency (60Hz/50Hz).

Specifies the operational ambient temperature range from 0°C to 40°C.

Provides voltage, current, and power ratings for various DC outputs.

Measures 14ms at full load under normal line input voltage.

Operates at 50KHz at normal line input.

Maintains stability within +/- 5% for 24KHR after warm-up.

Shuts down outputs if +12V,+5V,&+3.3V fall below 60% of max value.

Defines nominal, minimum, and maximum voltage thresholds for protection.

Handles short circuits on main rails and ensures +5VSB resilience.

Shuts down when output power exceeds 110%-150% of rated capacity.

Details the 20+4Pin ATX main connector and 4+4Pin EPS 12V connector.

Describes PCI Express 6+2Pin and 8Pin connectors for GPUs.

Lists connectors for peripherals, SATA drives, and floppy drives.

Warning against opening the power supply case due to electrical shock risk.

Ensure input voltage switch matches environment (115V/230V).

Advise to avoid exposure to humidity.

Visit www.apevia.com for warranty, support, and release information.

Support phone number and email address provided for inquiries.

Instructions for plugging in the 24-Pin connector to the motherboard.

Guidance on using 4Pin or 8Pin (4+4Pin) +12V connectors for the CPU.

Connecting PCI Express for video cards and Molex/SATA for storage.

Verify power supply, power cord, and all internal connectors are properly seated.

Ensure the I/O button is ON and allow a 5-second delay after power off.