EasyManua.ls Logo

Apevia Prestige Series User Manual

Apevia Prestige Series
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Apevia Prestige Series and is the answer not in the manual?

Apevia Prestige Series Specifications

General IconGeneral
BrandApevia
ModelPrestige Series
CategoryPower Supply
LanguageEnglish

Summary

Product Specifications

AC Input Voltage

Specifies the acceptable AC input voltage range.

AC Input Frequency

Defines the supported AC input frequencies.

Operating Temperature

States the ambient temperature range for operation.

DC Output Specifications

Details the voltage and current ratings for DC outputs.

Overall Performance

Hold Up Time

Measures the duration power is maintained after input loss.

Switching Frequency

Indicates the frequency at which the power supply switches.

Stability

Describes the output voltage stability over time.

Protections

Under Voltage Protection

Describes shutdown behavior when voltage drops too low.

Over Voltage Protection

Details shutdown limits for excessive output voltage.

Short Circuit Protection

Explains shutdown response to output short circuits.

Dimensions

Precautions

Electrical Shock Warning

Advises against opening the power supply case.

Input Voltage Verification

Ensures input voltage matches environment before operation.

Humidity Exposure

Recommends avoiding exposure to humidity.

Installation Guide

Motherboard Connection

Instructions for connecting the 24-pin ATX connector.

CPU Power Connection

Guide for connecting 4-pin or 8-pin CPU power.

Video Card Connection

Steps for connecting PCI Express connectors to video cards.

Peripheral Connections

Details on connecting Molex and SATA connectors.

Troubleshooting Common Issues

Power Cord and Connection Check

Verifies proper connection of power supply and cord.

Power Switch Status

Ensures the power supply's I/O button is in the 'I' position.

Connector Verification

Checks if all internal connectors are properly seated.

Power Cycle Delay

Advises a 5-second interval before re-powering.

Related product manuals