Need help?Do you have a question about the Apevia X-Dreamer and is the answer not in the manual?
General| Brand | Apevia |
|---|---|
| Model | X-Dreamer |
| Category | Computer Accessories |
| Language | English |
Procedure to remove thumbscrews from the rear of the computer case.
How to release the left side panel of the computer case.
Installing the power supply onto the mounting ledges inside the case.
Ensuring the power supply screw mount points are correctly aligned.
Fastening the power supply screws to the back of the case.
Referencing motherboard index for correct standoff placement based on ATX type.
Fitting the motherboard I/O shield into the case opening.
Aligning and mounting the motherboard onto standoffs with screws.
Removing metal shields and drive bay covers for installing drives.
Aligning and inserting 5.25-inch and 3.5-inch drives into their bays.
Aligning screw holes and securing drives with screws to the drive bay.
Inserting and securing a hard-drive into its designated bay.
Procedure to remove PCI slot covers using a flat object.
Installing a PCI expansion card into the correct slot.
Fastening the installed PCI card with a screw.
Locating front panel leads like HD Audio, USB, and SATA, noting positive wires.
Referring to motherboard manual for connecting front panel leads correctly.
Identifying the device temperature probe.
Placing the probe on a CPU heatsink fin using thermal tape.
Placing the probe on a hard-drive's surface for temperature monitoring.
Plugging the 4-pin connector to the power supply for LCD system temperature monitoring.
Routing the front panel LED power connector to a peripheral cable.
Returning side panels and screws to complete the X-Dreamer 3 assembly.
Diagram showing pin configuration for eSATA connections.
Diagram detailing pin assignments for front panel audio connectors.
Diagram illustrating pin assignments for USB front panel connectors.
To Next Page
