EasyManua.ls Logo

Apex Digital AD-1200 - User Manual

Apex Digital AD-1200
39 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
AD-1200
Safety Precautions
The lightning flash with an arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT OPEN THE CABINET DANGEROUS HIGH VOLTAGES ARE
PRESENT INSIDE THE ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD
ATTEMPT THIS.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, AND
FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUE, INTRODUIRE LA LAME LA PLUS LARGE DE LA
FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU' AU FOUD.
CAUTION: This Digital Video Disc Player employs a Laser System. To prevent direct exposure to the laser beam, do not try to open the enclosure.
Visible laser radiation when open and interlocks defeated.
Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
DO NOT STARE INTO BEAM.
To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. Should the unit require
maintenance, contact an authorized service location, or contact APEX Digital Inc.Only qualified service personnel should remove the cover.
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class B digital device. Pursuant with the FCC Rules, Part
15. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the
instructions,may cause harmful interference to radio communication,However,this is no guarantee that interference will not occur
in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined
by turning the equipment off and on,the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:To assure continued compliance,(example-use only shielded interface cables when connecting to computer or
peripheral devices).Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
WARNING:
Changes or modifications made to this equipment, not expressly approved by APEX or parties authorized by APEX will void all the
manufacture warranties.
THE REGION CODE FOR THE UNIT IS 1.
Since it is very usual for DVD movies to be released at different times in different regions of the world, all players have
region codes and disks can have an optional region code. If you load a disk of a different region code to your player, you
will see the region code notice on the screen. The disk will not play, and should be unloaded.
For Customer Use:
In spaces provided below, record the Model and Serial No. located on the rear panel of your DVD video player.
Model No. Serial No.
Retain this information for future reference.
CLASS 1
LASER PRODUCT
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PART INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
!
!
1
APEX DIGITAL

Other manuals for Apex Digital AD-1200

Questions and Answers

  • R
    robert65Aug 12, 2025
    What to do if my Apex Digital AD-1200 DVD Player does not start playback?
    • A
      amanda95Aug 12, 2025
      If your Apex Digital DVD player isn't starting playback, ensure the disc is placed with the graphics side up and correctly inside the guide on the disc tray. Also, check that the disc is free from scratches and fingerprints. Try pressing the SETUP button to turn off the menu screen. You might also need to cancel the parental lock function or change the parental lock level, using the default password 3308. As a last resort, turn the power off, disconnect the power plug, reinsert it, and retry. Finally, ensure you're using region 1 discs only.
  • B
    Brittany GriffithAug 16, 2025
    How to fix no power on Apex Digital AD-1200 DVD Player?
    • D
      Debra SmithAug 16, 2025
      If you're experiencing no power with your Apex Digital DVD Player, ensure that the power plug is securely connected to the wall outlet.
  • K
    kelly01Aug 19, 2025
    What to do if there is no sound from my Apex Digital AD-1200?
    • T
      tiffanyortizAug 20, 2025
      If you're not getting any sound from your Apex Digital DVD player, first, ensure the audio cables are securely connected into the jacks. Also, verify the connection from the DVD audio output to the TV or receiver audio input, and then switch to the appropriate source on the receiver. Refer to your audio amplifier owner's manual for specific instructions.
  • D
    Daniel BlevinsAug 25, 2025
    What to do if there is no picture on my Apex Digital AD-1200?
    • J
      Jonathan MitchellAug 25, 2025
      If you're not getting any picture on your Apex Digital DVD player, verify the connection from the DVD video output to the TV video input and switch the TV to the appropriate mode (video 1). Also, make sure the video cable is securely connected into the jacks. Refer to your television owner's manual for further assistance.
  • R
    Richard PriceAug 27, 2025
    How to fix Apex Digital AD-1200 DVD Player remote control that does not work?
    • B
      Beth JohnsonAug 28, 2025
      If the remote control for your Apex Digital DVD player isn't working properly, try replacing the batteries with new ones. Ensure that you are operating the remote control within a range of about 7 meters.
  • C
    cassandrachenAug 31, 2025
    What to do if my Apex Digital AD-1200 MP3 won’t read disc or it skips?
    • C
      Christopher FrankAug 31, 2025
      If the MP3 disc won’t read or skips on your Apex Digital DVD player, try re-burning the disc, as the software edition used may not be compatible with the player. Consider using newer software versions such as Voyetra Audiostation 4, Adaptec’s “Easy CD Creator” or NTI. Also, ensure that the MP3 files are not encoded with a variable bit rate, such as those provided by Real Networks.
  • J
    Jennifer ReynoldsSep 4, 2025
    Why is the brightness unstable, or why are noises produced on playback pictures on my Apex Digital AD-1200?
    • E
      Elizabeth SullivanSep 4, 2025
      If the brightness is unstable or noises are produced on playback pictures with your Apex Digital DVD player, connect the DVD player directly to the TV, bypassing other sources. This issue can be due to the copy protection circuitry present in all DVD players. If your TV lacks a video input, you may need to purchase an RF adapter.
  • S
    sharonlewisSep 8, 2025
    How to adjust picture if it appears soft on Apex Digital AD-1200 DVD Player?
    • R
      Roger FowlerSep 8, 2025
      If the picture appears soft or has too much edge enhancement on your Apex Digital DVD player, use the ENHANCE video effect feature.

Summary

Safety Precautions

Electrical Safety Symbols

Warnings for voltage and instructions.

Operational Safety Warnings

Avoid moisture, high voltages, proper plug use.

Laser System Safety

Prevent direct beam exposure, do not open enclosure.

Safety Information

General Usage and Care

Read instructions, cleaning, water/moisture, ventilation.

Electrical and Power Safety

Power sources, grounding, polarization, attachments.

Advanced Safety Measures

Environmental and Installation Safety

Antenna grounding, lightning, power lines, object/liquid entry.

Servicing and Damage Handling

Refer to qualified personnel, unplug for damage.

Installation and Component Safety

Parts, Checks, and Mounting

Use specified parts, safety checks, proper mounting, heat.

Disc Management

Disc Handling and Cleaning

Proper handling, cleaning methods, and storage advice.

Component Identification

Front Panel Controls

Identifies power, tray, open/close, play, stop, and indicator lights.

Rear Panel Connections

Identifies audio/video output and sensor ports.

Remote Control Operation

Button Functions

Details functions of various remote control buttons.

Remote Control Preparation and Use

Preparing the Remote

Inserting batteries and closing the cover.

Connecting to a TV

RCA (Composite) Connection

Standard connection using composite video and audio cables.

S-Video Connection

Connection using S-Video and audio cables for better quality.

Connecting via RF Modulator

Connection 1: DVD to RF Modulator to TV

Steps for connecting DVD, RF modulator, and TV.

RF Modulator Connection Options

Connection 2: DVD via Cable;Satellite Box

Connecting DVD through a cable or satellite box to RF modulator.

Connection 3: DVD, VCR, Cable;Sat Box to TV

Complex setup involving multiple devices and RF modulator.

Connecting Optional Equipment

Dolby Digital;DTS Setup

Connecting for Dolby Digital;DTS

Connecting to Dolby Digital/DTS receiver.

Setting Digital Audio Output

How to configure digital audio output settings.

MP3 CD Playback

Basic Disc Playback

Powering On and Opening Tray

Steps to turn on the player and open the disc tray.

Loading and Playing Discs

How to place disc and start playback.

Advanced Playback Controls

Selecting Titles from Menu

How to select titles from a menu screen.

Advanced Playback Speeds

Slow Motion and Resume Playback

Navigating Discs

Locating Titles via Menu

Using the title menu to select specific titles.

Direct Title;Chapter Selection

Picture and Video Adjustments

Subtitle Selection

Audio and Angle Selection

On-Screen Display Information

Parental Lock Settings

Setting Parental Lock Levels

Setting rating levels for content control.

Customizing Function Settings

Audio Output Configurations

Troubleshooting Guide

Common Symptoms and Corrections

Solutions for no power, no picture, no sound, distortion, etc.

MP3 and Remote Issues

Troubleshooting MP3 read errors and remote control problems.

Apex Digital AD-1200 Specifications

General IconGeneral
TypeDVD Player
Audio OutputStereo, Digital Coaxial
Remote ControlYes
Power SupplyAC 120V, 60Hz
Disc FormatsCD-R, CD-RW
Supported MediaDVD, CD
Video OutputComposite, S-Video

Related product manuals