Apex Digital AD-1200 User Manual (English)

Other manuals for Apex Digital AD-1200

Questions and Answers:

R
robert65Aug 12, 2025
What to do if my Apex Digital AD-1200 DVD Player does not start playback?
- A
  amanda95Aug 12, 2025
  If your Apex Digital DVD player isn't starting playback, ensure the disc is placed with the graphics side up and correctly inside the guide on the disc tray. Also, check that the disc is free from scratches and fingerprints. Try pressing the SETUP button to turn off the menu screen. You might also need to cancel the parental lock function or change the parental lock level, using the default password 3308. As a last resort, turn the power off, disconnect the power plug, reinsert it, and retry. Finally, ensure you're using region 1 discs only.
B
Brittany GriffithAug 16, 2025
How to fix no power on Apex Digital AD-1200 DVD Player?
- D
  Debra SmithAug 16, 2025
  If you're experiencing no power with your Apex Digital DVD Player, ensure that the power plug is securely connected to the wall outlet.
K
kelly01Aug 19, 2025
What to do if there is no sound from my Apex Digital AD-1200?
- T
  tiffanyortizAug 20, 2025
  If you're not getting any sound from your Apex Digital DVD player, first, ensure the audio cables are securely connected into the jacks. Also, verify the connection from the DVD audio output to the TV or receiver audio input, and then switch to the appropriate source on the receiver. Refer to your audio amplifier owner's manual for specific instructions.
D
Daniel BlevinsAug 25, 2025
What to do if there is no picture on my Apex Digital AD-1200?
- J
  Jonathan MitchellAug 25, 2025
  If you're not getting any picture on your Apex Digital DVD player, verify the connection from the DVD video output to the TV video input and switch the TV to the appropriate mode (video 1). Also, make sure the video cable is securely connected into the jacks. Refer to your television owner's manual for further assistance.
R
Richard PriceAug 27, 2025
How to fix Apex Digital AD-1200 DVD Player remote control that does not work?
- B
  Beth JohnsonAug 28, 2025
  If the remote control for your Apex Digital DVD player isn't working properly, try replacing the batteries with new ones. Ensure that you are operating the remote control within a range of about 7 meters.
C
cassandrachenAug 31, 2025
What to do if my Apex Digital AD-1200 MP3 won’t read disc or it skips?
- C
  Christopher FrankAug 31, 2025
  If the MP3 disc won’t read or skips on your Apex Digital DVD player, try re-burning the disc, as the software edition used may not be compatible with the player. Consider using newer software versions such as Voyetra Audiostation 4, Adaptec’s “Easy CD Creator” or NTI. Also, ensure that the MP3 files are not encoded with a variable bit rate, such as those provided by Real Networks.
J
Jennifer ReynoldsSep 4, 2025
Why is the brightness unstable, or why are noises produced on playback pictures on my Apex Digital AD-1200?
- E
  Elizabeth SullivanSep 4, 2025
  If the brightness is unstable or noises are produced on playback pictures with your Apex Digital DVD player, connect the DVD player directly to the TV, bypassing other sources. This issue can be due to the copy protection circuitry present in all DVD players. If your TV lacks a video input, you may need to purchase an RF adapter.
S
sharonlewisSep 8, 2025
How to adjust picture if it appears soft on Apex Digital AD-1200 DVD Player?
- R
  Roger FowlerSep 8, 2025
  If the picture appears soft or has too much edge enhancement on your Apex Digital DVD player, use the ENHANCE video effect feature.

Apex Digital AD-1200 Specifications

General

Type	DVD Player
Audio Output	Stereo, Digital Coaxial
Remote Control	Yes
Power Supply	AC 120V, 60Hz
Disc Formats	CD-R, CD-RW
Supported Media	DVD, CD
Video Output	Composite, S-Video