What to do if Apex Digital Mini-Plus doesn’t operate?
If your Apex Digital Respiratory Product isn’t operating, first ensure the plug is correctly inserted into a suitable electrical outlet. Also, if the device has been running continuously for more than 30 minutes, it might have been auto shut down by the built-in thermal protector. In this case, allow the device to cool down for 30 minutes before attempting to use it again.
Why is my Apex Digital Mini-Plus Respiratory Product nebulization weak?
Weak nebulization in your Apex Digital Respiratory Product could be due to several reasons: * Ensure you are using the proper electrical voltage. * Check the tubing for any blockages or air leaks where it connects to the Mini Plus compressor or the nebulizer cup. Replace the tubing if needed. * Inspect the nebulizer cup for proper assembly and any signs of damage. Replace if damaged. * Examine the filter to see if it is excessively dirty; replace the filter if necessary.
General| Brand | Apex Digital |
|---|---|
| Model | Mini-Plus |
| Category | Respiratory Product |
| Language | English |
Safety instructions to reduce the risk of electrocution, including unplugging after use and avoiding water.
Safety instructions to reduce risks of burns, electrocution, fire, or injury, emphasizing supervision and proper use.
System intended to provide compressed air for aerosol therapy using a jet nebulizer.
Basic safety precautions for using the electrical product, especially with children present.
Step-by-step guide for daily operation of the compressor nebulizer system.
Information regarding the thermal overload protector and continuous operation limits.
Instructions for cleaning the exterior of the compressor unit.
Procedure for cleaning nebulizer cup, tee, and mouthpiece after each use.
General maintenance guidelines, including oil-less operation and servicing by qualified personnel.
Instructions on how to change the air filter and precautions for filter usage.
Procedure for replacing the fuse in the device using a coin.
Guidance on electromagnetic emissions and compliance for the device in various environments.
Guidance on electromagnetic immunity and compliance for the device against various tests.
Guidelines for conducted RF immunity, including test levels and electromagnetic environment.
Guidelines for radiated RF immunity, including test levels and electromagnetic environment.
To Next Page
