Apex Digital UPUT-RACK-V2 - Assembly Instructions; Slide Front Bar onto Side Rails; Slide Center Bar onto Side Rails; Attach Cab Hoop

Page 4Rev. 062618
DiscountRamps.com • 1-888-651-3431
Assembly
Step 1. Slide the front bar (D) onto the front bar side rails (B).
Step 2. Slide the center bar (E) onto the front side bar rails (B).
Step 3. Attach the cab hoop (A) to the front side bar rails (B), securing with M10x65 carriage bolts,
washers, and nuts (M).
Step 4. Slide the front legs (G1, G2) onto the front side bar rails (B). Note: tie-down cleats should be
facing outward.
3a.
4.
1b.1a.
2a.
2b.
3b.