Apex Digital UPUT-RACK-V2 User Manual

Page 1Rev. 062618
DiscountRamps.com • 1-888-651-3431
General Guidelines
• It is the user’s responsibility to read and follow all instructions.
• Keep these instructions with the product at all times and review before each use.
• It is the responsibility of this product’s owner to furnish the instructions to any person that borrows
or purchases the product.
• Inspect the product before use to ensure it is assembled properly and all parts are in safe working
order and free of defects.
• Never modify this product in any way.
• All circumstances cannot be addressed in these instructions. Please use common sense and
practice general safety measures when using this product.
• Parts and/or instructions are subject to change without notice.
Safety
• Do not exceed the carrying capacity of 800 lbs. Doing so could result in property damage or per-
sonal injury.
• The truck rack adds more weight to your vehicle and raises the center of gravity when loaded. Use
caution when making sharp turns to prevent product damage, cargo loss, or the vehicle from rolling
over.
• Ensure the cab hoop does not come in contact with the truck cab to prevent property damage.
• Use su󰀩cient tie-down straps when transporting cargo on the truck rack (sold separately).
• Not for use with step-side trucks.
• Be sure all nuts and bolts are tight on a regular basis and no foreign objects are preventing the
rack from sitting or working properly.
• Scratches and dents should be inspected to ensure full usability and exposed metal should be
touched up/painted to deter rusting.
Universal Steel Pickup Truck Rack
Instructions for Part #UPUT-RACK-V2
Tools Required
• 17mm wrenches
• 19mm wrenches
• 24mm wrenches

Apex Digital UPUT-RACK-V2 Specifications

General

Brand	Apex Digital
Model	UPUT-RACK-V2
Category	Automobile Accessories
Language	English

Summary

General Guidelines and Safety Information

Tools Required for Installation

Product Parts Identification

Assembly Instructions

Slide Front Bar onto Side Rails

Slide the front bar (D) onto the front bar side rails (B) as the first assembly step.

Slide Center Bar onto Side Rails

Slide the center bar (E) onto the front side bar rails (B) during assembly.

Attach Cab Hoop

Secure the cab hoop (A) to the front side bar rails (B) using specified hardware.

Attach Front Legs

Slide the front legs (G1, G2) onto the front side bar rails (B), ensuring tie-down cleats face outward.

Attach Rear Side Rails

Connect rear side rails (C) to front side bar rails (B) using brackets and hardware.

Attach Back Legs and Rear Bar

Install back legs (G3, G4) and rear bar (F), securing with turn knobs (J).

Secure Legs and Bars

Finalize assembly by securing legs and bars with the specified hardware.

Attach Mounting Feet

Secure mounting feet (H1-H4) to the legs (G1-G4) using M16x85 hardware.

Installation on Truck

Measure and Adjust Legs

Measure truck bed and adjust rack legs to appropriate positions before installation.

Position and Tighten Rack

Position rack on bed rails, align legs, and fully tighten M16x85 bolts.

Secure J-Bolts or Permanent Mount

Secure rack using J-Bolts or drill for permanent mounting to bed rails.

Product Warranty and Liability

General Product Warranty Terms

Details on product defect coverage, transferability, and non-authorized dealer limitations.

Warranty Period and Service

Specifies the one-year warranty period and service procedures for defective parts.

Warranty Limitations and Exclusions

Lists conditions like misuse, accidents, or normal wear that void the warranty.

Limited Liability Statement

Defines the extent of the Authorized Dealer's liability for damages arising from product use.