Apex Digital UPUT-RACK-V2 - Attach Rear Side Rails; Attach Back Legs and Rear Bar; Secure Legs and Bars

7 pages

To Next Page

To Previous Page

Page 5Rev. 062618

DiscountRamps.com • 1-888-651-3431

Step 5. Slide the rear side rails (C) onto the front side bar rails (B). Connect the sections using the

connecting brackets (I), M10x20 carriage bolts, and nuts (N).

Step 6. Slide the back legs (G3, G4) onto the rear side rails (C). Note: Tie-down cleats should be

facing outward. Install the rear bar (F) and secure with turn knobs (J).

Step 7. Secure legs and bars with appropriate hardware.

5a. 5b.

M10x25 bolt

and nut (N)

M12x55 bolt, washer, and nut (L)M12x55 bolt, washer, and nut (L)

M16x85 bolt, washer, and nut (K)

6b.

6a.