Apex Digital UV4060 - 1.1.1 Machine Installation and Relevant Parameter; 1.1.2 Machine Use Notices

MT-FP4060-UV Operating Manual
5
1.1.1 Machine Installation and Relevant Parameter
Machine Brand Name
MT-FP4060-UV (The short name: 4060-UV Direct Printer)
Interface
USB2.0
Power Requirement
50/60HZ 220V(±10%) ＜20A
Environment
20 ~ 28 ℃ HR40-60%
Print Head
Epson DX5 (Nozzles 180x8)
UV Curing System
LED UV Lamp (air cooling)
X/Y/Z-axis motors
Servo Motors
RIP Software
PhotoPrint RIP
Software Language
English/Chinese
Operation System
Microsoft Windows 98/2000/XP/Win7
Ink Type
UV Ink
Ink color
K C M Y W
Ink Supply System
CISS
Max. Print Format
60x40cm
Max. Print Gap
15cm
Machine N.W
106KG
Machine Dimension
118 x 78 x 45cm
Materials to Print
Metal, Plastics, Glass, Wood, Ceramics, Acrylic, Leather, etc
1.1.2 Machine Use Notices

Please remove the print head holder from the left and right side of the printer
body(eg: below photo)
 Turn on the machine and use machine every day, which is suggested. If you don’t have printing job someday,
please just make a nozzle check pattern and print some pictures.
 If the machine will not be used for over 30 days, the print heads are suggested to disassemble and make a cleaning,
and then keep well
.
 Before printing, please adjust the print gap between print head and print object to be 1-2mm, and then start
printing. Be cautious, if the print head is lower than print object surface, the print head will get scratched or
clashed.