Aphex EXCITER - 7.0 SPECIFICATIONS

Page 23
Owner’s Manual
7.0 Specifications
INPUT
Connector:
Type:
Balanced:
Unbalanced:
Nominal Level:
Maximum Level:
CMRR:
OUTPUT
Connector:
Type:
Balanced:
Unbalanced:
Nominal Level
Maximum Level:
AUDIO
Frequency Response:
Dynamic Range:
Hum and Noise:
Crosstalk:
THD:
IMD:
OPERATING LEVEL
Switch Setting: +4dBu -10dBV
XLR-3F and TRS 1/4” phone jacks
Transformerless, active balanced
40KΩ
20KΩ
+4dBu
+27dBu
>40dB
XLR-3M and TRS 1/4” phone jack
Active Balanced
(may be used unbalanced)
112Ω
56Ω
+4dBu
+27dBu Unloaded, +25dBu into 600Ω
+0.5dB 10Hz-38KHz
120dB
- 93dBu, unweighted 22Hz-22KHz
10Hz - 22kHz, -79dB
10Hz - 22kHz @ max output, .0003%
10Hz - 22kHz 0 max output, .0007%
Same
Same
40KΩ
20KΩ
-10dBV (-7.8dBu)
+12.5dBV (+14.8dBu)
>40dB
Same
Same
Same
Same
-10dBV (-7.8dBu)
+12.5dBV (+14.8dBu)
Same
Same
Same
Same
Same
Same
OTHER SPECIFICATIONS
Voltage Rating: 100V = 240V
Unit is electrically supplied through an agency approved IEC-type datachable primary power cord.
Power Rating: 12 watts
Dimensions: 19” W x 1.75” H x 8.25” overall depth (482.6mm W x 445mm H x 209.6mm overall depth); depth
behind front panel: 7.5” (190.5mm)
Net Weight: Rack-mounted: 6lbs. (2.73kg)
Shipping Weight: 9lbs. (4.1kg)