Owner’s Manual
Page 9
Tune-Up
The Rule
Trust your ears!
Getting It Going
While in bypass, adjust your instrument’s volume and tone con-
trols as you normally would. Set all the knobs on the Punch Fac-
tory to 12 o’clock. Then, switch the Punch Factory on and adjust
the Input control to get some amount of compression as indi-
cated on the dB Bar Graph Meter. Adjust the Punch Factory’s
Output so the sound is where you want it with the pedal on com-
pared to off. Finally, adjust the Ratio control to suit your taste
and playing style.
To Next Page
Loading...
