API Outdoors Bowhunter - Product Support and Maintenance; Backpacking and Transportation Guide

ATTENTION!! WHEN YOU SEE A “ WARNING!” BE SURE TO HEED THE MESSAGE!
THE INFORMATION CONTAINED IN THESE MESSAGES CAN SAVE YOUR LIFE!!
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT(S).
This instruction manual complies with the Treestand Manufacturers Association’s TMS 04 - Standard Practice for Treestand Instructions and TMS 02 - Standard Test Method for Treestand Fall Arrest Systems.
17
MODEL GCL303-A FOLLOW THESE BACKPACKING INSTRUCTIONS:
STEP 1: v-brackets of the foot and seat sections allowing the sections to collapse at. Insert the
rear of the foot section into the seat section. Then using (1) cinching strap secure the front of the foot and seat sections together.
STEP 2: padded backpack straps thread through and around the foot section at the rst rung. With remaining ends
of padded backpack straps thread through and around the opposite end of the foot section. Adjust for comfort.
STEP 1. Place the seat section over top of the foot sectioncinching straps provided cinch
the foot section and the seat section together, Fig. 4.
STEP 2. padded backpack straps thread through and around the foot section at the rst
rung, Fig. 2. With remaining ends of padded backpack straps thread through and around the opposite end of
foot section, Fig. 3. Adjust for comfort.
STEP 2. Slide your feet under the foot straps.
Slip the heel cord onto each boot heel as
shown in Figure 12.
STEP 3.    
from around the tree.
STEP 4.    
       
     
       
     

STEP 5. With your weight squarely distributed on the standing platform, lift the
seating platform by grasping the padded armrests and set the seating platform at


STEP 6.
(for model GCL205-A only). Gently place your weight onto the seat
section and turn your feet downward slightly to disengage the standing platform



STEP 6.
(for models GCL300-A, GCL303-A, GCL305-A, GCL405-A). Gently place your weight onto the padded seating platform rail portion of the




STEP 7. 
chest height.
STEP 8. 
WARNING! 
ground. Failure to follow these instructions may result in serious injury or death!
STEP 9. 

Fig 13A Fig 13B
BACKPACKING INSTRUCTIONS
Fig 1 Fig 2
Fig 3
Fig 4
Fig 12