To Next PageTo Next PageWhat to do if my APLICOM GPS has no GPS position?
If your APLICOM GPS is not showing your position, ensure the GPS antenna has a clear view of the sky. Also, check for any obstructions that might interfere with the GPS antenna's signal, such as electronic heated windshields.
How to troubleshoot APLICOM A1 when there is no power?
If your APLICOM GPS unit has no power, verify that all cables and fuses are properly connected. Ensure that the PWR is connected and the IGN is on. Check that the power indication LED A is green after the power is connected and IGN is on.
Details physical mounting options: screws, cable ties, dual lock fasteners, or broadside installation.
Ensures power lines are protected with a fuse at the source end for safety.
Details connecting A1 device and peripherals, emphasizing IGN- connection.
Advises placing GSM/GPRS antennas away from radio antennas to prevent interference.
Provides key technical specifications including supply voltage, current, dimensions, weight, and housing.
Details indicators (LEDs), reset switch, SIM slot, and available battery options.
Lists critical warnings regarding warranty, power, cable handling, and connector torque.
A checklist to verify correct device installation, cable routing, and antenna fitting.
Guides users through common problems like no power, no GPRS, or no GPS position.
Illustrates example connections for GPS, GPRS, COM ports, BUS, and various sensors.
Provides instructions for installing the internal SIM card and battery, with safety notes.
General