Need help?Do you have a question about the Apogee Instruments MQ-500 and is the answer not in the manual?
General| Type | Quantum Sensor |
|---|---|
| Measurement Range | 0 to 4000 µmol m⁻² s⁻¹ |
| Spectral Range | 400 to 700 nm |
| Calibration Uncertainty | ± 5% |
| Accuracy | ± 5% |
| Repeatability | Less than 0.5 % |
| Response Time | Less than 1 ms |
| Field of View | 180° |
| Operating Temperature Range | 0 to 50 °C |
| Operating Environment | 0 to 50 °C |
| Non-linearity | Less than 1 % |
| Relative Humidity Range | 0 to 100 % |
| Output | 0-2.5 V DC |
Describes sensor's response across different wavelengths.
Details how sensor readings change with temperature.
Explains sensor accuracy at different radiation incidence angles.
Covers leveling plates, brackets, and sensor wands for mounting.
Tool to estimate PPFD for recalibration checks.
Basic steps to check if the meter is working correctly.
Information on battery status and replacement procedures.
Steps to perform a master reset on the meter.
Explains common error codes and their solutions.
Guidance on extending sensor cable length.
Information on converting units for sensor readings.
To Next Page
