Need help?Do you have a question about the Apogee MQ-500 and is the answer not in the manual?
General| Calibration Uncertainty | ± 5 % |
|---|---|
| Field of View | 180° |
| Accuracy | ± 5 % |
| Resolution | 0.1 µmol m⁻² s⁻¹ |
| Operating Temperature | 0 to 50 °C |
| Response Time | < 1 ms |
| Operating Environment | 0 to 50 °C; less than 90 % relative humidity non-condensing up to 30 °C; less than 70 % relative humidity non-condensing from 30 to 50 °C |
| Power Supply | Not required |
| Data Logging | Requires external data logger |
| Output | 0-2.5 V DC |
Manufacturer's statement of product conformity with EU directives and standards.
Procedures for resetting the quantum meter to its default settings.
How to view logged data on the LCD and download it to a computer.
Detailed steps for replacing the battery in the quantum meter.
How to check if the quantum meter is operating correctly.
Information on battery duration and low battery indicator.
Troubleshooting steps for low battery indicator issues.
Procedure to reset the meter to resolve anomalies.
Explains error codes and their solutions for the quantum meter.
Guidance on extending the sensor cable length for the quantum meter.
Information on converting PPFD units for various applications.
Terms and conditions for returning purchased products.
Details on what is covered and not covered under the product warranty.
Options for service and support for products out of warranty.
Legal terms, dispute resolution, and governing law for the warranty.
To Next Page
