eighteen
6. If gas or vapor
source cannot be
located, contact
a service
center for a
leak
check
before using LP Gas
System.
Electrical
Specifications:
Power requirements: 12
Volts DC 0.6
Amps
Operating
Voltage
Range: l0 to 15
Volts DC
Sensitivity:
Less than 25% of the
L.E.L. (Lower Explosive Level) of Butane
or Pro-
pane gas in air.
Less than 15% of the L.E.L.
of Gasoline vapor in air.
Less than 2% of the L.E.L.
of Ethyl Alcohol vapor in air.
Calibration:
Calibrated
to alarm at
20%
of the L.E.L.
of Propane using a certified
gas mix-
ture
of Propane and
dry air at room temperature
(25+5°C).
To Next Page