Apollo 7 User Manual

Specifications
Bluetooth version
Bluetooth profiles
Audio codecs
Wireless range
(from paired device)
Battery capacity
Driver size
Sensitivity
Frequency
Impedance @ 1kHz
MEMS omnidirectional
microphone input sensitivity
Water proof
4.1
A2DP 1.2, AVRCP 1.4, HFP 1.6, HSP 1.2
aptX/AAC/SBC
10 meters (30 feet)
Earphone (50mAh)
Charging case (Li-Ion rechargeable,
300mAh)
Ø 5.8mm Micro Driver
100dB/mW
20Hz-20KHz
16ohm
-42dB (+/- 2dB)
Nano coating technology
EN
Pairing Apollo 7 with a
Bluetooth-enabled device for the
first time
Insert either earbud in your ear, then press and hold
its button until you hear "Power On", followed
by
"Pairing", then release the button and connect to your
paired device, tap “Apollo 7-L" or “Apollo 7-R”
in the
Bluetooth device list and you will hear
"Phone Connected". Next, insert the second earbud
and
press/hold its button until you hear "Power On".
Release the button, and you will hear
“Headset Connected“. This means the two earbuds
are in sync.
*You can enjoy the music by pairing earbud
individually, but we suggest pairing both with the
same device so you can answer calls or activate
Siri/Google voice assistance.
Single-touch multifunction
Power on/off, volume up/down, pairing, play/pause,
play next/previous track, call accept/reject, and Siri
are accessible with one button. Please read and
follow these guidelines to ensure the best and safest
experience with your Apollo 7
Apollo 7 True Wireless
Headset

Apollo 7 Specifications

General

Brand	Apollo
Model	7
Category	Headsets
Language	English

Summary

Pairing Apollo 7 with a Bluetooth-enabled device

First-time pairing process

Insert earbud, hold button until 'Power On'/'Pairing', release, connect. Then pair second earbud for sync.

Individual earbud pairing

Pairing one earbud at a time is possible, but pairing both is suggested for calls/voice assistant.

Single-touch multifunction

Button control functions

One button controls power, volume, pairing, play/pause, track skipping, call management, and voice assistant.

Apollo 7 Specifications

Bluetooth and Audio Details

Bluetooth version 4.1, profiles A2DP/AVRCP/HFP/HSP, and aptX/AAC/SBC audio codecs.

Wireless and Battery Specs

10m wireless range, 50mAh earphone battery, 300mAh charging case battery.

Physical and Performance Specs

5.8mm driver, 100dB/mW sensitivity, 20Hz-20KHz frequency, 16ohm impedance, -42dB mic sensitivity.

Durability Features

Water resistance via nano coating technology.

Dimensions and Weight

Earphone and Charging Case Dimensions

Specifies dimensions for the earphone and charging case in millimeters and inches.

Weight Specifications

Details the weight for earphones and the charging case in grams and ounces.

Earbud Controls and Indicators

Basic and Call Functions

Describes single-click for ON/OFF/Pairing, double-click for Siri/Google, and call functions.

Music and Navigation Controls

Details controls for Play/Music, volume up/down, and track skipping via long presses.

Left Earbud Specific Functions

Left earbud allows song restart (2s press) or skip previous (3s press within 3s).

Earphone Stabilizer Placement

Keep the button upright for better connectivity due to directional antenna.

Charging Case Operation

Charging Case Features

Easy one-pull removal and auto turn-off/charge features when earbuds are placed in the case.

Charging Case Light Indicators

LED Indicators for Charging Status

LED 2 indicates full charge. LED 1 flickers for low case battery (<30%) or low earbud battery (<5%).

Important Cautions

General Usage Precautions

Use Micro USB for charging only, avoid parked vehicles, high temperatures, humidity, and foreign objects.

Product Handling and Disposal

Do not disassemble, damage, jolt, burn, or place heavy weight. Recycle responsibly.

Long-Term Maintenance and Battery Care

Headset and Case Maintenance

Recharge headset/case every three months for optimal battery lifespan and performance.

Preventing Battery Damage

Avoid leaving the charging case fully discharged for prolonged periods; maintain at least 30% charge.

Regulatory Statements

FCC Compliance

Covers FCC part 15 rules, interference guidelines, and RF exposure statement for body-worn operation.

Industry Canada (IC) Compliance

Addresses IC statement, ICES-003, RSS-247, and RF exposure guidelines for body-worn operation.