12
FIRST START-UP
To do before using the scooter
Make sure to follow recommen-
dations regarding tire inflation
pressure: the recommended
pressure is between 45-50 PSI
(2.7 bar - 3.4 bar).
Check that the folding system is
correctly locked.
Check that all screws and bolts
are tightened, and that the
handlebar and front wheel are
perpendicular to each other.
Check all the connecting
elements. The clamps on the
handlebars and on the stem must
be adjusted correctly and must
not show any sign of damage.
When receiving the scooter, it is
very important to do a full veri-
fication and check of all scooter
components before the first
ride. Please verify the following
IMPORTANT:
Read carefully and keep
for future reference. Keep
the packaging, it contains
important information.
components:
• Nuts and Screws: Self-tight-
ening nuts and screws be-
come less effective with use;
check that they are working
correctly on a regular basis.
• Sharp Edges: At any sign
of sharp edges, stop using
the scooter and contact the
aer-sales service.
• Tires: Upon receipt and aer
usage, please check the
wear of the wheels regularly,
and if there is a flat spot or if
the wheel is worn, stop using
the scooter and contact the
Customer Support service.
• Wheel Bearings: Regularly
check for signs of wear on
the wheel bearings: if the
lubrication is inadequate or
if the surface shows signs of
irregular wear, stop using
the scooter and contact the
Customer Support service.
• Brakes: Check that the brake
functions properly. Do not
make any modification
that does not feature in the
manufacturer's user man-
ual. Failure to follow these
instructions can damage the
item, cause accidents and
void the warranty.
• Chassis/frame: Check that
the chassis/frame is not bent
or damaged and that there
are no cracks in the paint,
which would indicate exces-
sive friction.
• Scooter underside: The
underside of the scooter
must be in good condition,
with no signs of wear caused
by rubbing on the ground.
Any damage will reduce the
WARNING:
Incorrect assembly, mainte-
nance, or use of your Apollo
scooter can cause compo-
nent or performance failure,
loss of control, serious injury,
or death. Even if you’re an
experienced scooter rider,
you must read and under-
stand the entire manual and
any documentation provid-
ed for subcomponents or
accessories before riding.
If you are not sure you have
the experience, skills, and
tools to correctly perform all
assembly steps in the manual
and the assembly video at
apolloscooters.zendesk.
com, consult our support
team or a local electric
scooter shop.
To Next Page
Loading...
Need help?
General
