2.INSTALLATION
Open the packaging and check whether the unit is damage or not during the transportation.
If the unit is found damaged, please immediately notify the transportation company. Only
you have the right to ask for the transport damages compensation. Please keep the box well
as the damage evidence and provide it for the side delivery checking. Our company will
provide you with necessary assistance.
In addition, we also recommend you saving all packaging materials for the need of the
transportation. Do not transport the unit without package to avoid damaging the unit.
To make the unit work normally, you also need to prepare the following parts
(our company does not provide):
1. Input wiring cable;Output wiring cable;
2.Ethernet cables (individual series need to use the advanced features);
3.Network router (individual series need to use the advanced features);
4.Rack or unit mounting bracket (provide a stable table for the unit stacked).
Warning: Before you beginning to install the unit, please make sure
to carefully read and follow the "important safety instructions" at
the beginning of the manual.
2.1.Structure diagram
Warning: The third pin (grounding) of the AC power cord connector
which this unit uses is the necessary security components. Do not
use adapters or other methods to make the ground connection failure.
*The renderings are only for reference, and the actual item is the standard.
44
390
483
04
ΣM SERIES PROFESSIONAL POWER AMPLIFIER
M- 4202
To Next Page
Loading...
