APPA 98II - Frequency and RPM Measurement; Capacitance Measurement

23
3-7 Hz / RPM Measurement
1. Connect the red test lead to the “ VΩ Hz ” terminal and the other (black) test lead to the “COM” terminal.
2. Set the rotary function selector to “Hz RPM” position to measure the frequency or RPM.
3. Connect the test leads to the circuit to be measured.
3-8 Capacitance Measurement
1. Connect the red test lead to the “ V ΩHz ” terminal and the other (black) test lead to the “COM” terminal.
2. Set the rotary function selector to “ ” position to measure capacitance.
3. Connect the test leads to the circuit to be measured.
4. In order to ensure the best accuracy in measurement of low capacitance, to memorize the stray capacitance of
open test leads in mind to subtract from reading.