Need help?Do you have a question about the APPA A1 and is the answer not in the manual?
General| Category | Measuring Instruments |
|---|---|
| Type | Digital Multimeter |
| Continuity | Yes |
| Diode Test | Yes |
| Model | A1 |
| Display | LCD |
| Temperature Range | -40°C to 1000°C |
| Duty Cycle | 0.1% to 99.9% |
| Safety Standard | IEC 61010-1 CAT III 600V |
| Current Measurement Range | 400µA to 10A |
Provides essential safety guidelines for using the meter to prevent accidents.
Details the procedure for turning the meter on and off using specific button presses.
Details how the meter automatically detects and measures AC or DC current.
Highlights safety precautions for jaw voltage rating and proper meter handling.
Describes how to measure inrush current, its calculation, and trigger conditions.
To Next Page
