Need help?Do you have a question about the APPA 76 and is the answer not in the manual?
General| Continuity | Yes |
|---|---|
| Diode Test | Yes |
| Input Impedance | 10 MΩ |
| Power Supply | 9V battery |
| DC Current | 0.1μA to 10A |
| AC Current | 0.1μA to 10A |
| Measurement Range | Depends on function |
| Resolution | Depends on range |
Lists the items included with the RC Meterplus upon unpacking.
Details the display, switches, sockets, and connectors on the meter's front panel.
Details display type, polarity, over range, and low battery indicators.
Specifies operating temperature, storage temperature, and RH limits.
Details power requirements, battery life, dimensions, and weight with/without holster.
Details capacitance measurement ranges, resolutions, accuracies, and test frequencies.
Details resistance measurement ranges, resolutions, accuracies, and overload protection.
Covers specifications for Diode, LED, Transistor hFE/ICEO, and SCR testing.
Outlines specifications for testing various battery types.
Step-by-step instructions for accurate capacitance measurement, including safety warnings.
Instructions for performing resistance measurements with the meter.
Procedure for measuring transistor hFE and leakage current (ICEO).
Guide for testing SCRs and thyristors for functionality.
Step-by-step instructions for replacing the internal 9V battery.
Instructions for checking and replacing the meter's fuse.
Guidance on using the probe holder for operation and storage of test probes.
Instructions on utilizing the tilt stand and holster for meter positioning and hanging.
To Next Page
