System Test
Please test your Smartlife alarm monthly. Press and hold your personal
help button and count to three. Voice messages on the base unit will
play to let you know the status of your request for help as it progresses.
When you hear the operator, tell them you are testing. If you encounter
a problem when trying to test your Smartlife, please contact Careline
Community Service.
Installation reminders
Do not unplug or move the Smartlife base unit from the location it has
been installed.The location it is installed in has been tested to ensure it
has good cellular connectivity and range with your personal help button.
Moving the base unit could adversely affect its ability to send an alert
for help.
If you are relocating, you will need to contact your service provider to
organise a new installation and change your address details.
Cleaning and Maintenance
• Clean your personal help button and base unit with a warm,
well wrung out, damp cloth.
• Do not spray your personal help button or base unit with perfume,
insect repellent or similar harsh products.
• Do not use abrasive or polishing cleaners.
• Do not immerse your base unit or help button in liquid or position it in
a place where liquids could be spilled on it.
• Do not try and open any part of your base unhit or personal help
button.
• Do not stick objects in any of the holes or sockets on your base unit
or personal help button.
• Do not cut any of the wires connected to your base unit
To Next Page
Loading...