10 -
Apple Cinema HD Display (23-inch DVI) Trou-
FireWire Devices Symptom Charts
– If the cables are damaged, replace the I/O panel.
– If the cables are fine, replace the main board.
6. If the System Profile window appears as shown below, check the FireWire connection
to the computer. If the connection is fine, reseat the cable and refresh the window. If
there is no change, check the cable connection at J13 on the lower left corner of the
main board (black shrink-wrapped cable).
• If the cable or cable connector is damaged, replace the display cable.
• If the J13 connector on the main board is damaged, replace the main board.