101 -
iBook (14.1 LCD 16 VRAM) Take Apart
Bezel Brace with Clutch Assembly
Bezel Brace with Clutch
Assembly
Tools
• Soft cloth
• #0 Phillips screwdriver
Replacement Note:
If the tape you remove from this assembly is worn and cannot be
reused, use new Kapton tape (Apple part number 922-5025).
Preliminary Steps
Before you begin, remove the following:
• Battery
• Bottom case
• Keyboard and RAM shield
• Airport Card
• Top case
• Top shield
• Display module
• LCD panel
• Display clutch cover
• Inverter board
• Antenna board
• Reed switch board
• Microphone cable
To Next Page
Loading...
