Apple IIe - Page 157

Apple BASIC Reference Guide 157
SQR
SQR returns the square root of its argument.
STOP
Configuration
SQR
(a)
Example
10 x = 49
20 PRINT SQR (X)
]RUN [Ret]
7
• Applesoft
D Integer
• Applesoft
o Integer
The STOP statement causes a halt in the execution of an
Applesoft BASIC program.
Configuration
STOP
If STOP is executed in the program mode, the following screen
message
will be displayed,
BREAK
IN XXX
where XXX is line number where STOP was executed.
CONT can be used to rescue program execution after it was
halted by
the execution of a STOP statement.