Apple IIe - Page 170

170 Apple lie Users Handbook
You may find it necessary to adjust the tone and volume controls
in order for the cassette to properly record data . The easiest
mean .s of doing this is to try saving and reloading a program. If
the program can be saved and then reloaded without any
difficulties, the volume and tone controls are adjusted properly.
If one of the following error messages appears :
ERR
***SYNTAX ERR
set the volume control higher and again attempt the saving and
loading process.
SAVING & LOADING A PROGRAM ON CASSETTE
The SA VE command is used to save a program from RAM to the
cassette recorder . Prior to executing SAVE, be certain that a
.
cassette has been placed in the cassette recorder and that the
tape has been positioned as desired . Then , press the recorder 's
play
and record keys and enter the following command at the
keyboard :
SAVE [Ret)*
The Apple lie will beep once as it begins recording the program
on tape , and will beep a second time when the recording process
has been completed . After the second beep , press the recorder's
stop key.
*[Ret] indicates
that the return key should be pressed.