3. Make sure the Wi-Fi icon is next to the word iPad in the top left corner, you are
connected!
4. Open Safari, and type in the address bar xhsapple!
5. Click Enroll My iPad button on the middle of the screen!
6. Click continue!
7. Enter your Xaverian username and password !
8. Continue through the enrollment, clicking Install or Done, as needed!
9. When the enrollment is finished being installed, you will see a message that says
j Enrollment Complete!!
10.Hit the home button the return to iPad home screen. If prompted by an Edit Home
j Screen message, you can dismiss it.!
11.It can take up to a few minutes for all the information to be downloaded.!
!
After you enroll your iPad, you will now be able to connect to the Student network. To
connect your iPad to the Student network:!
!
1. On the home page, click on Settings!
2. On the Settings page, click on the Wi-Fi tab.!
3. Now that your iPad is enrolled, you will have to connect to the student network, so
click on the Wi-Fi network titled Student.!
4. Once you see the Wi-Fi icon in the top left corner next to "iPad" you are ready to go!
!
You are now able to surf the web, open the App Store, and have the world at your finger
tips.!
To Next Page
Loading...
