Mac mini Upgrades - 3
AirPort and Bluetooth Upgrade
8. Hold the putty knife with the beveled edge facing the bottom housing. Insert the tool
into the gap where the metal housing and the bottom assembly come together on the
left side of the computer. Important: Be extremely careful not to scratch or dent the
top or bottom housing when inserting the tool.
9. Gently release the internal latches by prying the tool away from the computer.
Note: You will hear little popping sounds as the latches release and the bottom
moves away from the top housing, creating a gap at the top of the I/O panel.
To Next Page
Loading...
