To do this: Follow these steps:
Start up the computer 1. Insert a floppy startup
disk(if you don't have a hard disk).
2. Press the top of the on/off switch.
Open an application 1. Click the icon for the application.
2. Choose the Open command from the File
menu. Or double-click the icon.
Create a new document 1. Open the icon for the application
program you want to use to create the
document.
2. Use the tools and menu commands
available in the application program
to create your document.
3. Choose the Save command from the
File menu to save and name your
document.
4. When you are finished working on the
document, choose the Quit command
from the File menu to exit the
application program and return to the
Finder desktop.
Save a document 1. Choose the Save command from the File
menu. If this is the first time you've
saved this document,follow steps 2
and 3:
2. Type a name for the document.
3. Click the Save button.
Open a document icon 1. Click the icon.
2. Choose Open from the File menu.
Or double-click the icon.
Open a document from 1. Choose Open from the File menu.
2. Click the name of the document.program
3. Click the Open button.
Enter text in 1. Position the I-beam where
a document you want to enter text.
2. Click to set the insertion point.
3. Type.
Select text 1. Position the I-beam at the start
of the text you want to select.
2. Drag to the end of the text you
want to select.
Select a word Double-click the word.
Delete text 1. Select the text.
2. Press the Delete key.
Move a block of text 1. Select the text you want to move.
2. Choose Cut from the Edit menu.
3. Click to set the insertion point
To Next Page
Loading...