Basics Extended Compatibility for Service - 9
• Power Macintosh 8550
• Power Macintosh 8600
• Power Macintosh 9500
• Power Macintosh 9600
• Power Macintosh 9650
To properly set up the display to work with one of the listed
Power Macintosh computers,
1 Install the Keyspan USB card in the PCI expansion slot.
2 Confirm that the computer has at least 2 MB VRAM
(required to enable all screen resolutions).
3 Perform a clean install with Mac OS 8.5 or later.
4 Install Apple Displays Software 1.7 or later.
5 Install USB driver 1.1 (called Mac Installer) from the
disc that comes with the Keyspan USB card.
To Next Page
Loading...
